Carriers for fix biomass types C, C-2 & C-3
BIOFILL® carriers types C, C-2 and C-3 are fix biomass carriers for MBBR moving beds and exchange towers

In the following table you will find all the technical characteristics of each of the models.
| Model | TYPE C | TYPE CT | TYPE C-2 | TYPE C-2T | TYPE C-3 |
| Specific surface (m2/m3) | 460 | 460 | 590 | 590 | 840 |
| Free volume (%) | 90 | 90 | 90 | 90 | 90 |
| Weight per unit (gr.) | 1,7 | 1,8 | 2,1 | 2,3 | 1,4 |
| Num. of pieces/m3 | 75.000 | 75.000 | 85.000 | 85.000 | 150.000 |
| Weight – Kg/m3 | 130 | 135 | 177 | 196 | 208 |
| Piece diameter (mm) | 28 | 28 | 25 | 25 | 34 |
| Produced by injection in | PP and PE | PP and PE | PE | PE | PE |
| Order | Random | Random | Random | Random | Random |
| Compression – Kg/m³ | 500 | 500 | 600 | 600 | 600 |
| Max. Work temperature (˚C) | 90 | 90 | 90 | 90 | 90 |
| Resistance to hydrocarbons | Good | Good | Good | Good | Good |
| Resistance to alkaline | Excellent | Excellent | Excellent | Excellent | Excellent |
The most important characteristics are:
- Greater useful surface compared to other carriers on the market.
- Manufacture by injection and not by extrusion in order to greater of biomass adherence due to its protected rough surfaces.
- Greater thickness of its walls, which prevents its breakage and its conversion into micro plastics.
- Better design that prevents the already fixed biomass from falling off due to the contact between pieces.
- The density of the carriers in general is <1. The CT, C-2T and C-3T carriers have a density> 1 and their use is intended for brackish waters and sea waters.
For a good application of our carriers, head over to our post on moving bed design.
When a carrier with density> 1 is desired, it must be specified in the request.